BETAFPV Matrix 1S Brushless G4 5-in-1 V2 Solder-free AIO FC for 1S Whoop Drones

Introduction

The BETAFPV Matrix 1S Brushless G4 5-in-1 V2 is a next-generation, all-in-one flight controller designed for enthusiasts of 1S FPV whoop drones. It combines essential components into a single, compact unit, offering a high-performance, solder-free solution for building powerful micro drones with minimal setup time. This FC is the ideal core for pilots who demand reliability and efficiency.

Key advantages

• True all-in-one design: Integrates Flight Controller (FC), Electronic Speed Controller (ESC), Receiver (RX), On-Screen Display (OSD), and Video Transmitter (VTX).
• Solder-free installation: Features a contact-free configuration for a quick, clean, and beginner-friendly setup process.
• High current ESC: Delivers robust and responsive motor performance with 12A continuous current.
• Enhanced durability: Reinforced PCB and shock-absorbing mounting design improve impact resistance.
• Optimized layout: Thoughtful component arrangement enhances overall durability and reliability.
• Advanced processing: Equipped with an efficient processor and modern gyroscope for precise control and smooth flight characteristics.
• Integrated ELRS and VTX: Includes a built-in ELRS receiver and a high-power 5.8GHz VTX for extended long-range capabilities.

Technical specifications

• FC MCU: STM32G473CEU6
• Gyroscope: ICM42688P
• Blackbox Memory: 16 MB
• Sensors: Voltage and Current
• BEC: 5V, Max 3A
• UARTs: UART 1, UART 2 (for VTX), UART 3 (for RX), UART 4
• BetaFlight OSD: AT7456E
• ESC Continuous Current: 12A
• Receiver: Serial ELRS 2.4 GHz (V3.4.3)
• VTX: 5.8 GHz 48 Channels, Max 400mW
• FC Firmware: Betaflight_4.5.3_BETAFPVG473_V2
• USB Port: SH1.0-4Pin
• Motor Connector: JST1.25
• Battery Connector: BT2.0
• Mounting Hole Size: 26x26mm
• Weight: 4.1±0.1g

• ESC Input Power: 1S Only
• ESC Peak Current: 18A
• ESC Firmware: A_X_5_96KHz_V0.19.hex for BB51 Bluejay firmware
• ESC Signal Protocol: DShot300, DShot600

• VTX Output Power: 25/100/200/400/PIT
• VTX Frequency: 5.8 GHz 48 Channels (Raceband: 5658~5917 MHz)
• VTX Channel Selection: SmartAudio2.0
• VTX Modulation Type: FM
• VTX Frequency Control: PLL
• VTX Harmonic All: Max -50 dBm
• VTX Frequency Stability: ±100 KHz (Typical)
• VTX Frequency Precision: ±200 KHz (Typical)
• VTX Channel Carrier Error: ±1.5 dB
• VTX Antenna Port: 50 Ω
• VTX Operating Temperature: -10℃~80℃
• VTX Weight (without antenna): 4.13g

Applications

This AIO FC is perfect for building custom 1S FPV whoop drones, micro FPV racers, and freestyle drones. Its compact size and integrated features make it suitable for indoor and outdoor FPV flying, cinematic FPV, and general drone hobbyist projects requiring a powerful yet lightweight flight controller.

Compatibility

Designed for 1S LiPo batteries with a BT2.0 connector. Features a SH1.0-4Pin USB port for configuration and JST1.25 connectors for brushless motors. Compatible with Betaflight firmware and ELRS 2.4GHz receivers.

FAQ

What is the BETAFPV Matrix 1S G4 5-in-1 V2 AIO FC and who is it for?

The BETAFPV Matrix 1S G4 5-in-1 V2 is an all-in-one flight controller designed for 1S FPV whoop drones. It integrates the FC, ESC, RX, OSD, and VTX into a single board, making it ideal for hobbyists looking for a high-performance, solder-free solution for their micro drone builds.

What are the main advantages of the solder-free design?

The solder-free design significantly simplifies the building process, reducing setup time and making it more accessible for beginners. It ensures a clean installation and minimizes potential errors associated with manual soldering, allowing for a faster path to flight.

What are the key technical specifications of this AIO FC?

This FC features an STM32G473CEU6 MCU, ICM42688P gyroscope, 16MB blackbox, 12A continuous ESC, integrated ELRS 2.4GHz receiver, and a 5.8GHz 400mW VTX. It supports DShot600 and Betaflight firmware.

Can this FC be used for long-range FPV flights?

Yes, the integrated ELRS 2.4GHz receiver and the 400mW 5.8GHz VTX provide excellent range capabilities, making it suitable for pilots interested in long-range FPV flying with their 1S whoop drones.

Where can I buy the BETAFPV Matrix 1S G4 5-in-1 V2 AIO FC with fast delivery?

You can buy the BETAFPV Matrix 1S G4 5-in-1 V2 AIO FC at HTDRONE. We are based in Poland and offer fast shipping within Poland and worldwide via DHL. Check our store for the best deals and order yours today!