Diatone MAMBA F405MK2 V2 40A 6S 8bit FPV ESC/FC Stack for Racing Drones

Introduction

The Diatone MAMBA F405MK2 V2 40A 6S 8bit Stack is a powerful and integrated solution for FPV drone enthusiasts. This stack combines a high-performance Flight Controller (FC) with a robust 40A ESC, designed to handle demanding flight conditions and power requirements up to 6S LiPo batteries. Ideal for FPV racers and freestylers seeking reliable performance and clean wiring, this stack simplifies your build process while maximizing flight control capabilities. It's the go-to choice for pilots who demand precision and power.

Key Advantages

• High Power Handling: Supports 3-6S LiPo input, with a 40A continuous current rating per motor and 50A burst capability.
• Advanced Flight Control: Features an STM32F405 MCU running at 168MHz for fast and responsive flight performance.
• Integrated OSD: Built-in OSD (On-Screen Display) provides essential flight data directly to your FPV feed.
• Durable Construction: Equipped with TVS protection on the FC and high-quality power components for enhanced reliability.
• Multiple UARTs: Offers 3 sets of UARTs for easy connection of receivers, GPS modules, and other peripherals.
• BF LED Support: Compatible with Betaflight LED control for customizable lighting effects.
• Clean Wiring: Includes all necessary cables and connectors, including an AMASS XT60 connector, for a straightforward installation.
• Compact Mounting: Standard 30.5mm x 30.5mm mounting pattern fits most FPV frames.

Technical Specifications

• FC MCU: 168MHz STM32F405
• Gyro: MPU6000
• Target Firmware: FURYF4OSD
• OSD: Yes
• Blackbox Memory: 16M Flash
• Barometer: No
• UARTs: 3 sets
• I2C: Yes
• F.Port: No
• RSSI: Yes
• Buzzer Pad: Yes
• CURR Pad: Yes
• ESC Signal Pads: 4 sets
• ESC Protocol: Dshot300/600
• ESC Telemetry: Yes
• Power Diode: Yes
• LED Controller: BF LED
• Air Unit Port: Yes
• WIFI: No
• VTX Switch: No
• Receiver Protection: Yes
• BEC Protection: Yes
• TVS Protection (FC): Yes
• FC BEC Output: 3.3V 0.5A, 5V 2A, 9V 2A
• FC Input Voltage: 3~6S Lipo (12.6~25.2V)
• FC Mounting Size: 30.5mm / M3
• ESC Model: MAMBA F40MK2
• ESC Input Voltage: 3~6S Lipo (12.6V~25.2V)
• Continuous Current: 40A x 4
• Burst Current: 50A (10S)
• ESC BEC: No
• ESC Target Firmware: BLHeli_S CH40
• ESC Protocol: Dshot300/600
• ESC TVS Protection: No
• ESC Mounting Size: 30.5mm / M3
• Power Components: 1000uF/35V Capacitor, 8-pin SH1.0 connectors, Air Unit SH1.0 connector, 12AWG 100mm wires, AMASS Original XT60 connector.

Applications

This FPV stack is perfectly suited for building high-performance FPV racing drones, freestyle quadcopters, and agile cinematic FPV setups. Its robust design and power capabilities make it ideal for intense flying sessions and competitive racing where reliability and responsiveness are crucial.

Compatibility

The stack features a standard 30.5mm x 30.5mm mounting pattern, compatible with most FPV drone frames. It supports 3-6S LiPo batteries and includes multiple UART ports for connecting various receivers (e.g., ELRS, Crossfire, FrSky) and other FPV system components. Power is supplied via an XT60 connector.

FAQ

What is the Diatone MAMBA F405MK2 V2 40A 6S 8bit Stack?

The Diatone MAMBA F405MK2 V2 is an integrated Flight Controller (FC) and Electronic Speed Controller (ESC) unit designed for FPV drones. It provides robust power handling for 6S LiPo batteries and reliable control for racing and freestyle applications.

What is the maximum voltage and current this FPV stack can handle?

This stack supports input voltages from 3S to 6S LiPo batteries (12.6V to 25.2V). The ESCs provide a continuous current of 40A per motor, with a burst capability of up to 50A for 10 seconds.

What are the key features of the Diatone MAMBA F405MK2 V2 FC?

The FC features an STM32F405 MCU, MPU6000 gyro, integrated OSD, 16MB of Blackbox flash memory, and 3 UART sets for peripherals. It also includes buzzer and CURR pads for enhanced functionality.

Where can I buy the Diatone MAMBA F405MK2 V2 40A 6S 8bit Stack?

You can order the Diatone MAMBA F405MK2 V2 40A 6S 8bit Stack from HTDRONE. We offer fast shipping within Poland and reliable delivery to Ukraine via Nova Poshta, as well as worldwide shipping via DHL.

Is this FPV stack suitable for beginners?

While powerful, the MAMBA F405MK2 V2 stack is generally recommended for intermediate to advanced FPV pilots due to its 6S capability and performance focus. However, its integrated design can simplify the building process compared to separate components.