FlashHobby F722 FC + 60A ESC Stack for FPV Drones

Introduction

The FlashHobby F722 FC + 60A ESC Stack is a high-performance, integrated flight control and power solution engineered for demanding FPV drone builds. It combines a feature-rich F722 flight controller with a potent 60A 4-in-1 ESC, creating a compact and efficient module perfect for 3S-6S LiPo configurations. This stack is ideal for pilots seeking a streamlined setup for freestyle flying, competitive racing, or stable cinewhoop footage, offering simplified wiring and ample power output.

Key advantages

• Plug-and-play integration minimizes wiring complexity and installation time.
• Full compatibility with DJI O3, RunCam Link, Caddx Vista, and DJI Air Unit V1 for seamless digital FPV integration.
• Onboard OSD and telemetry support simplify flight control configuration and monitoring.
• Robust power delivery with TVS protection and a high-quality capacitor for enhanced durability.
• Multiple voltage outputs (5V, 9V, 3.3V) allow for direct powering of various peripherals.
• Dedicated LED and buzzer pads for status indication and customizable lighting effects.
• High-performance STM32F722 MCU and ICM42688 IMU ensure precise flight control.
• Supports DSHOT300/600 protocols for responsive ESC communication.

Technical specifications

• FC Name: FLASH HOBBY F722 30.5x30.5 Flight Controller
• MCU: STM32F722RET6
• IMU (Gyro): ICM42688
• USB Port Type: Type-C
• Barometer: BMP280
• OSD Chip: BetaFlight OSD with AT7456E chip
• DJI Air Unit Connection: Supports 6-pin connector or direct connection; fully compatible with DJI O3/RunCam Link/Caddx Vista/DJI Air Unit V1.
• Black Box: 16M Black Box
• Current Sensor Input: Supported (Scale = 180, Offset = 0 for 50A ESCs)
• Power Input: 3S-6S LiPo (via 8-PIN ESC connector)
• 5V BEC Output: 5 groups, 3A total current load
• 9V BEC Output: 3 groups, 2.5A total current load
• 3.3V BEC Output: 1 group, 300mA max current
• ESC Signal: M1 - M4
• UARTs: 6 sets (UART2, UART5, UART3), UART6 (SBUS), UART4 (ESC Telemetry), UART1 (VTX Data)
• ESC Telemetry: UART R4 (UART4)
• I2C: Supported (SDA & SCL pads on front)
• LED Pad: Supported (LED pads, 5V, GND on bottom front)
• Buzzer: Supported (5V, BZ pads for 5V buzzer)
• BOOT Button: Supported (for DFU mode and LED control)
• Flight Controller Firmware: BetaFlight (default)
• Firmware Target Name: STM32F722RET6
• Mounting: 30.5 x 30.5 mm (4mm mounting holes)
• FC Dimensions: 37 x 37 x 6.6 mm
• FC Weight: 7.5 g
• ESC Name: FLASH HOBBY BLS 60A 30.5 x 30.5 4-in-1 ESC
• ESC Firmware: BLS 16.7
• Continuous Current: 55A x 4
• Burst Current: 60A (5 seconds)
• TVS Protection Diode: Yes
• External Capacitor: 35V 560uF low ESR capacitor (included)
• ESC Protocol: DSHOT300/600
• Power Input: 3-6S LiPo
• Power Output: VBAT
• Current Sensor: Supported (Scale = 180, Offset = 0)
• ESC Telemetry: Not Supported
• Mounting: 30.5 x 30.5 mm (4mm mounting holes)
• ESC Dimensions: 42.3 x 37 x 6.2 mm
• ESC Weight: 12 g

Applications

This FlashHobby stack is versatile and suitable for a wide range of FPV applications, including high-performance FPV racing, freestyle drone acrobatics, cinematic FPV flying with cinewhoop platforms, and custom UAV builds requiring reliable flight control and power distribution.

Compatibility

Flight Controller: Compatible with BetaFlight firmware. Supports DJI O3, RunCam Link, Caddx Vista, and DJI Air Unit V1 via dedicated connectors or direct wiring. Features multiple UARTs for GPS, telemetry, and VTX control. Supports SBUS receiver input. Includes pads for external LED strips and buzzers.

ESC: Compatible with 3S-6S LiPo batteries. Supports DSHOT300/600 ESC protocols. Integrated current sensing. Requires 30.5x30.5mm mounting pattern.

FAQ

What is the FlashHobby F722 FC + 60A ESC Stack?

The FlashHobby F722 FC + 60A ESC Stack is an integrated flight controller and electronic speed controller unit designed for FPV drones. It offers a compact solution with high performance, suitable for various FPV applications.

What LiPo battery voltage does this FPV stack support?

This FlashHobby stack supports a wide voltage range, from 3S to 6S LiPo batteries, providing flexibility for different power requirements and flight styles.

Is the FlashHobby F722 FC + 60A ESC Stack compatible with DJI digital FPV systems?

Yes, it offers full compatibility with DJI O3, RunCam Link, Caddx Vista, and DJI Air Unit V1. It supports connection via a 6-pin connector or direct wiring, simplifying integration.

What are the mounting dimensions for this FPV stack?

The FlashHobby F722 FC + 60A ESC Stack features standard 30.5 x 30.5 mm mounting dimensions with 4mm mounting holes, making it compatible with most FPV drone frames.

Where can I buy the FlashHobby F722 FC + 60A ESC Stack with fast delivery?

You can buy the FlashHobby F722 FC + 60A ESC Stack at HTDRONE. We offer fast shipping within Poland and reliable worldwide delivery via DHL for international orders.