Holybro X500 V2 FPV Kit with Pixhawk 6C, M10 GPS, and 433MHz Radio for UAV Projects

Introduction

The Holybro X500 V2 FPV Kit is a professional, ready-to-fly drone platform engineered for engineers, researchers, and FPV enthusiasts working with PX4 or ArduPilot flight controllers. This modular quadcopter integrates a Pixhawk 6C flight controller, M10 GPS, and a 433 MHz telemetry radio with a robust carbon fiber frame. It is designed to deliver exceptional performance and reliability for aerial robotics, mapping, and autonomous flight projects. With tool-free and solder-free assembly, integrated power management, and clean cable routing, the X500 V2 ensures a smooth setup and outstanding expandability, making it the ideal choice for rapid prototyping, education, and research applications.

Key Advantages

• Modular plug-and-play design with pre-wired components and reliable connectors, eliminating the need for soldering.
• High-performance carbon fiber frame offering rigidity, vibration damping, and structural durability.
• Powerful 2216 KV920 motors and 1045 propellers for stable lift and precise control, optimized for 4S LiPo batteries.
• Advanced M10 GPS module with integrated compass for accurate positioning and fast satellite acquisition.
• Reliable SiK telemetry radio (433 MHz) for stable two-way communication, mission uploads, and real-time monitoring.
• Intelligent power management via the PM02 V3 power module, supporting up to 12S input and providing clean power to sensitive electronics.
• Full compatibility with open-source ecosystems like PX4, ArduPilot, QGroundControl, and MAVLink for extensive mission planning and analysis tools.
• Education and research-friendly design, perfect for labs, universities, and R&D teams focused on autonomous flight, SLAM, or AI-based navigation.

Technical Specifications

• Frame Wheelbase: 500 mm
• Frame Material: Carbon fiber plates and arms
• Top/Bottom Plate Thickness: 2 mm
• Vertical Clearance (between plates): 28 mm
• Landing Gear Height: 215 mm
• Motor Mount Spacing: 16x16 mm / 19x19 mm
• Motor Type: Holybro 2216 KV920 brushless motors (×4)
• Propellers: 1045 carbon fiber reinforced composite (6 pcs)
• ESCs: BLHeli S 20A ESCs (×4) with XT30 connectors
• Power Module: PM02 V3 (supports 12S, current and voltage sensing)
• Flight Controller: Pixhawk 6C (H7 dual-core MCU, IMU redundancy, vibration-damping mount)
• GPS Module: Holybro M10 GPS with integrated compass
• Telemetry Radio: SiK 433 MHz V3 telemetry radio module (pair)
• Recommended Battery: 4S LiPo 3000-5000 mAh (minimum 20C)
• Dry Weight (without battery): Approx. 610 g
• Typical Flight Time: Approx. 18 min (hover, no payload, 4S 5000 mAh)
• Payload Capacity: Up to 1 kg (typical operation at ~70% power)
• Operating Voltage: 14.8 V (4S) nominal
• Connector Type: XT60 (main) + XT30 (auxiliary)
• Software Compatibility: PX4 / ArduPilot / QGroundControl
• Frame Kit Weight (without electronics): Approx. 365 g

Applications

The Holybro X500 V2 FPV Kit is exceptionally versatile, making it ideal for a wide range of applications including advanced FPV flying, professional UAV operations, aerial mapping and surveying, AI-driven autonomous navigation research, SLAM (Simultaneous Localization and Mapping) projects, educational drone programs, and rapid prototyping for robotics challenges. Its robust build and integrated systems ensure reliable performance in demanding environments.

Compatibility

This kit is fully compatible with PX4, ArduPilot, QGroundControl, and MAVLink software ecosystems. It supports 4S LiPo batteries (3000-5000 mAh recommended) and features XT60 and XT30 connectors for power distribution. The modular design ensures easy integration with various sensors and payloads.

FAQ

What is the Holybro X500 V2 FPV Kit best suited for?

The Holybro X500 V2 FPV Kit is ideal for engineers, researchers, and FPV enthusiasts involved in aerial robotics, mapping, autonomous flight projects, and educational drone programs. Its modular design and advanced components like the Pixhawk 6C and M10 GPS make it perfect for rapid prototyping and research.

Does the Holybro X500 V2 require soldering for assembly?

No, the Holybro X500 V2 features a modular plug-and-play design. All major electronic components, including ESCs, motors, and flight controller connections, are pre-wired with reliable connectors, eliminating the need for soldering.

What is the typical flight time and payload capacity of the Holybro X500 V2?

With a recommended 4S 5000 mAh LiPo battery, the Holybro X500 V2 offers a typical flight time of approximately 18 minutes in hover without payload. It can carry a payload of up to 1 kg, operating typically at around 70% power.

What flight controllers and software are compatible with the Holybro X500 V2?

The Holybro X500 V2 is fully compatible with PX4, ArduPilot, QGroundControl, and MAVLink. It comes equipped with a Pixhawk 6C flight controller, which supports advanced features like IMU redundancy and vibration damping.

Where can I buy the Holybro X500 V2 FPV Kit with fast delivery?

You can buy the Holybro X500 V2 FPV Kit directly from HTDRONE. We are based in Poland and offer fast shipping within Poland and reliable worldwide delivery via DHL for international orders.